Home > Products > High polymer membrane > TPO > Self-adhesive Reinforced TPO W.....
Self-adhesive Reinforced TPO Waterproofing MaterialsSelf-adhesive Reinforced TPO Waterproofing MaterialsSelf-adhesive Reinforced TPO Waterproofing Materials

Self-adhesive Reinforced TPO Waterproofing Materials

  • thickness:1.2mm/1.5mm/2.0mm
  • width:2.05m
  • length:20m per Roll
Introduction
TPO, the abbreviation of thermoplastic Polyolefin, is made with the dynamically EPDM vulcanized EPDM, the main Ingredients of the composition of PP and EPDM. TPO mainly contains carbon atoms and hydrogen atoms and does not contain any plasticizers and chlorine elements. It is a beautiful, long-lived environment-friendly product.



Features
it ' s easy to install with the integrity, few accessories.
excellent tensile strength, tearing resistance and penetration resistance performance.
no plasticizer. They have been tested as have excellent resistance to thermal aging and ultraviolet, durable and exposed.
hot-air welding. The peel strength of joint are high.
fast welding speed.
environment Friendly, $number recycled, without chlorine.
durable Hot welding performance and easy to repair.
smooth surface, no fading and pollution. 

Applications
Widely used in the roofing and underground constructions of industrial and civil buildings. For different bases and constructions, PVC membranes is DWORD mechanically-attached, fully-adhered or ballasted.

Packing
Rolled with hard materials and packed with plastic bags or woven bags.

Storage
TPO material should is stored in well-ventilated place and avoid being to the sun or rain. The temperature in stored places can is higher than 45°c. It only can is put horizontally in five-level. It has to is avoided acid, alkali, oil and organic solvents. The shelf is 1.

By
TPO material should avoid inclination or lateral drift during transportation. When necessary, it is covered with felted fabric.


Application Methods
For Fully adhered Roofing system
Before application, spread TPO membranes on substrate in advance. Install TPO membranes on the substrate without distortions to the according. The overlapping width should being more than mm. Hot-air welding are adopted for laps with the mm welding width. Professional adhesives need to is used on both underside and substrate surfaces to adhere and maintain.

For ballasted Roofing System

Before application, spread TPO membranes on substrate in advance. Install TPO membranes on the substrate without distortions to the according. The overlapping width should being more than mm. Hot-air welding are adopted for laps with the mm welding width.


Technical Data Sheet
According to the constituent, it can is divided into
1. Homogeneous sheet (code:h),
2. fiber-backed sheet (code:l),
3. Sheet internally reinforced with fabric (code:p),
4. Sheet internally reinforced with fiber glass (code:g),
5. Sheet with fabric backing and reinforcement of glass fiber (CODE:GL).


Attentions
TPO membranes reflect heat and light. Being sure to wear protective mens (long-sleeved shirt, long-barreled trousers), and wear a filter to protect the skin and eyes From uv-induced damage.
security measures for roof perimeter necessary during application. Sheet surface is slippery on wet and therefore, take care to avoid slide.
sealants and adhesives are flammable containing solvents. They would is dangerous when exposed to heat, even have the possibility to catch fire and explode.
sealants, adhesives, cleaners should is avoided contacting with skin and eyes.
no smoking during application.



Weifang Dongsheng waterproof material Co.,Ltd

Tel:18053637268

Contact Person:sany

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )