Home > Products > Self-adhesive bitumen membrane > Self-Adhesive Bitumen Membrane > Cheap Build Materials Self Adh.....
Cheap Build Materials Self Adhesive Roofing Waterproof MembraneCheap Build Materials Self Adhesive Roofing Waterproof MembraneCheap Build Materials Self Adhesive Roofing Waterproof Membrane

Cheap Build Materials Self Adhesive Roofing Waterproof Membrane

  • Min. order Quantity: 2000 Square meters
  • Supply Ability     : 1500000  Square meters/month
  • Port              :QINGDAO PORT
  • Payment Term      :L/C,T/T
  • thickness             : 1.2mm,1.5mm,2.0mm
  • width                  :0.98m-1.05m
  • length                :10m-20m

Cheap build materials self adhesive roofing waterproof membrane      

Discriptions 

         

  Self-adhesive bitumen waterproof membrane is produced with SBS/APP blastomeric bitumen as raw materials, using polyethylene film, aluminum foil coated on the upward or no film (both side self-adhesive ) while self adhesive protection layer on the downward surface. It has a widely prospect new construction waterproof materials.Good self adhesion,no leaking,cold flexibility,especially in self-adhesion that is unique product in waterproof and allpicaton. 

 


Specifications


  1. Width: 100cm

  2. Length: 10m/15m/20m or as customized

  3. Thickness: 0.8mm-4mm


Product Feature


   1) Self adhesive bitumen waterproof membrane is easily and fast applied, good adhesion, torch and glue agent are not needed.

   2) Self adhesive bitumen waterproof membrane has good rubber elasticity, with good elongation, easily adopted to the crack and distortion

   3) Self adhesive bitumen waterproof membrane is good self-heal, automatic heal although with small puncture damage

   4) Self adhesive bitumen waterproof membrane is safe construction, no pollution.

   5) Self adhesive bitumen waterproof membrane is anti-corrosion, acid-resisting, alkali-resisting, aging-resisting.

 

Type/Available Thickness:


Type N (without reinforcement) 0.8mm,1.0mm,1.2mm,1.5mm,2.0mm 
Type PY (with polyester reinforcement) 1.5mm, 2.0mm, 3.0mm, 4.0mm
Type NK (with Fiberglass coumpound base reinforcement) 1.2mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm


Application


1. Ensure that surface is free from dirt, dust, contamination.

2.  Remove any loose material using a scraper or wire brush.

3. Application:+5 to +45℃.

4. Peel back the release liner and apply to the surface firmly, ensure that no air is trapped.

5. Using a roller, ensure that all the edges and overlaps are forming proper seals and installed in a manner where they will be self draining.






Weifang Dongsheng waterproof material Co.,Ltd

Tel:18053637268

Contact Person:amber2

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )