Home > Products > Modified bitumen membrane > sbs waterproof membrane > Building Material SBS Modified.....
Building Material SBS Modified Asphalt Waterproof Membrane for Swimming PoolBuilding Material SBS Modified Asphalt Waterproof Membrane for Swimming PoolBuilding Material SBS Modified Asphalt Waterproof Membrane for Swimming Pool

Building Material SBS Modified Asphalt Waterproof Membrane for Swimming Pool

  • Min. order Quantity:2000 Square meters
  • Supply Ability     :1500000  Square meters/month
  • Port              :QINGDAO PORT
  • Payment Term      :L/C,T/T
  • thickness             :2mm-5mm
  • width                  :1m,1.05m
  • length                :7.5m-10m
Building Material SBS Modified Asphalt Waterproof Membrane for Swimming Pool


SBS Discription:


SBS modified bitumen membrane is SBS (styrene-butadiene - styrene)thermoplastic elastomer modified bitumen as dip coating materials to high-quality polyester felt, fiberglass mat, cloth compound tires for the tire base to fine sand, mineral(film), PE film, aluminum and other materials for the cladding, using special mechanical mixing and grinding of elastomer modified bitumen membrane.




Features:


a) Conforms to the national standards
b) SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area
c) SBS II type is specially suitable for areas of high temperature and of strong sun-shine


Typical properties



Item

Requirements

Soluble matter content, g/m

4 mm

2900

5 mm

3500

Resistance to heat, ℃

105

Flexibility at low temperature, ℃

-25

Water tightness, 0.3 MPa

30 min, pass

Maximum tensile strength, N/50mm ≥

800

Elongation at the maximum tensile strength,% ≥

40

Mass gains after immersed in water

ARC-701PE/S

1.0

ARC-701M

2.0

Terminal aging

Tensile strength retention rate ,% ≥

90

Elongation retention rate, % ≥

80

Flexibility at low temperature, ℃

-20

Dimensional changes,% ≤

0.7

Mass loss,% ≤

1.0

Immersed in oil, pieces ≤

2

Joint and peeling strength, N/mm ≥

1.5

Adhesion of granules(for ARC-701S),g ≤

2.0

Coating over under surface, mm ≥

1.0

Artificial ageing behavior

Determination of visible defects

No sliding, flowing, dripping

Tensile strength retention rate ,% ≥

80

Flexibility at low temperature, ℃

-20

Resistance to root penetration

Pass

Resistance to corrosion

Class

0 or 1

Tensile strength retention rate ,% ≥

80

Dimensional changes,% ≤

1.0



Application Method:


1.Make sure the roof deck smooth,clean and dry(Moisture<9%),then apply the surface of roof deck homogeneously with a kind bitumen paint till dry to start application.

2.There are two methods in application:
One way is by heating and melting method---Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing),then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.
The other way is by cold adhesive method---Pour the cold adhesive homogeneously on the roof deck,then roll the membrane to install it to be fully sticked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation in application as requested.

3.After application ,a full serious inspection is required to sure no air bubble,no fold,no falling away etc. to guarantee the waterproof life.

Packing and Shipping:

Packing Details:SBS Modified Bitumen Waterproofing Membrane for Swimming Pool. Packed in rolls with pallets or as per clients' requirement.
Delivery Time:Within 15 days after receipt deposit.





Weifang Dongsheng waterproof material Co.,Ltd

Tel:18053637268

Contact Person:amber2

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )