Home > Products > Modified bitumen membrane > app waterproof membrane > Building Material APP Modified.....
Building Material APP Modified Asphalt Waterproof Membrane for Swimming PoolBuilding Material APP Modified Asphalt Waterproof Membrane for Swimming PoolBuilding Material APP Modified Asphalt Waterproof Membrane for Swimming Pool

Building Material APP Modified Asphalt Waterproof Membrane for Swimming Pool

  • Min. order Quantity:2000 Square meters
  • Supply Ability     :1500000  Square meters/month
  • Port              :QINGDAO PORT
  • Payment Term      :L/C,T/T
  • thickness             :2mm-5mm
  • width                  :1m,1.05m
  • length                :7.5m-10m
Building Material APP Modified Asphalt Waterproof Membrane for Swimming Pool


Products Discriptions:


Sand surface APP modified bitumen membranes  are made by soaking the base thermoplastics (such as a tactic polypropylene-APP,APAO.APAL) modified bitumen, then covering double faces with elastomeric (SBS)or thermoplastics (APP,APAO,APAL)modified bitumen, and last finishing the upward face with fine sands, mineral slates or polythene membrane etc. While downward face with fine sands or polythene membrane, It has good waterproofing and ageing-resistance function, not flowing at highest temperature and no crack at lowest temperature; easy application, no pollution, and long service life, etc. APP modified bitumen waterproof membrane is specially suitable to the building waterproofing in cold area and to the buildings of changeable constructions, while APP specially suitable to high temperature and strong sun-shining.





Where To Use 


Roofs or undergrounds.
Swimming pools, fire pools and reservoirs;
Subways or tunnels;
Open fires-forbidden construction areas;
Cold construction areas. 

 
Advantages 


Good tensile strength and elongation;

Strong adaptability for substrate shrinkage, deformation and cracks;

It will be a high-strength membrane to resist water;

Penetration-resisting and corrosion-resisting;

Excellent flexibility in low temperature;

Strong self healing ability for penetration and cracks.




Application:


Make sure the roof deck smooth, and dry (moisture<9%), then apply the surface oroof deck homogeneously with a kind bitumen paint, till dry to start application.
There are two methods in application:
One way is by heating and melting method. Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing), then install the membrane filly bonded to the roof deck with overlaps of 5-250px.b. The other way is by cold adhesive method. Pour the cold adhesive homogeneously on the roof deck, then roll the membrane to install it to be fully slicked to roof deck. By heating and melting method and by cold adhesive can be used in alternation in application as requested.
after application, a full serious inspection is required to sure no air bubble, no falling away, etc. to guarantee the waterproof life.



Weifang Dongsheng waterproof material Co.,Ltd

Tel:18053637268

Contact Person:amber2

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )