Home > Products > Self-adhesive bitumen membrane > Self-Adhesive Bitumen Membrane > 3mm SBS Self-adhesive Bitumen .....
3mm SBS Self-adhesive Bitumen  waterproofing  rolls3mm SBS Self-adhesive Bitumen  waterproofing  rolls3mm SBS Self-adhesive Bitumen  waterproofing  rolls

3mm SBS Self-adhesive Bitumen waterproofing rolls

  • Min.order Quantity: 2000 Square meters
  • Supply Ability: 1500000 Square meters/month
  • Loading Port:QINGDAO PORT
  • Payment Term:L/C,T/T
  • Thickness: 1.2mm,1.5mm,2.0mm
  • Width:1m-1.05m
  • Length:10m-20m


It is a modified bitumen base sheet consisting of styrene-butadiene-styrene (SBS) compound modified asphalt covering with different upper separated materials, no fiber and underside with silicone antisticking layer. According to different upper surface, it can be three types: PE film surf-acing, Aluminum foil surfacing and Non-film surfacing. There have three kinds of thickness:1.2mm, 1.5mm and 2.0mm.the length is 10m~20m,width is 0.98m~1.05m. It has such properties as good self-adhesion, no leaking, cold flexibility, especially in self-adhesion. That is unique in waterproof and application. 


Self adhesive, safe and environment-friendly
Excellent flexibility in low temperature and elongation
Strong adaptability for substrate shrinkage, deformation and cracks
Strong self healing ability for penetration and cracks
Lasting bonding and sealed performance
Excellent water resistance
Cold construction, easy to install
Available for wet ground

Where to use 

Swimming pools, fire pools and reservoirs
Subways or tunnels
Construction areas where open fires are forbidden
PE film surf-acing can be used in non exposed roofs and undergrounds
Aluminum foil surfacing can be used in all kinds of exposed roofs
Non-film surfacing can be used as an auxiliary material or bonding material between two incompatible places

Storage and Transportation 

Self adhesive waterproof membrane should be stored in well-ventilated shade place and protected from sun or rain. The temperature in stored places can not be higher than 50° C. It can not be put in more than two levels. If packed by cartons, it can not be put in more than five levels.

Dongsheng adhesive waterproof system includes substrate, primer, membrane waterproof underlayment, protection layer.
Dongsheng also provide a complete line of compatible accessories and components, including primers, pipe clamps, terminal battens and screws.

 Surface Preparation
Surfaces should be dry, clean, smooth and free from any dusts, oil or loose particles. Cracks and uneven places need to be filled by polymer mortar.
Before membrane laying, substrate treating agent need to be brushed evenly and completely to all the surface to be laid on.
Membrane laying
After treating agent on substrate dries, pave self adhesive waterproof membrane according to application designs.
Sealing, fixing and constraining on vertical surfaces
On vertical surfaces, fix with metal battens and seal with sealants for membranes.

Application on protection layer
After membrane laying, construct a protection layer according to waterproof layer design.

Weifang Dongsheng waterproof material Co.,Ltd


Contact Person:sany

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )