Home > Products > Modified bitumen membrane > sbs waterproof membrane > SBS Modified Asphalt Waterpro.....
Browse Categories
Home improvement eco-friendly materials(12)
Self-adhesive waterproofing tape(109)
Modified bitumen membrane(116)
High polymer membrane(302)
Geotextile & Geomembrane(50)
Waterproof Raw Material(43)
Waterproof Production Lines(10)
Pu Painting,Coating,Primer and Emulsion(28)
Asphalt Saturated Felt(10)
Self-adhesive bitumen membrane(96)
Certifications
Contact us
China Address: Zhengyang Road, Shouguang City, Shandong Province, ChinaTel:+86 18366529777Fax:+86 05365511977 E-mail:admin@dongshengwaterproof.com
Contact Now
SBS Modified Asphalt  Waterproof  for  RoofSBS Modified Asphalt  Waterproof  for  RoofSBS Modified Asphalt  Waterproof  for  RoofSBS Modified Asphalt  Waterproof  for  RoofSBS Modified Asphalt  Waterproof  for  Roof

SBS Modified Asphalt Waterproof for Roof

  • Min. order Quantity:2000 Square meters
  • Supply Ability     :1500000  Square meters/month
  • Port              :QINGDAO PORT
  • Payment Term      :L/C,T/T
  • thickness             :2mm-5mm
  • width                  :1m,1.05m
  • length                :7.5m-10m



Description


It is a modified bitumen base sheet consisting of Styrene - butadiene - styrene (SBS) modified bitumen added chemical imports Root inhibitor, strengthened with polyester fiber, cover different on Separating material. Depending on the surface, which includes three Type: PE film surfacing, surfacing and mineral sand Surfacing ARC-. There are two kinds of thickness: 4 mm to 5 mm.


Scope


Roof or subway;

Pool, Such as swimming pools, fire-fighting;

subway, Tunnels, bridges or concrete road surface;

Polluted water Plant, landfill project;

Penstock

 

advantage


·         Excellent waterproof and penetration;

·         It does not affect the normal growth of plants;

·         This will be a high-strength film to resist water;

·         Penetration resistance, abrasion resistance, tear resistance, Corrosion-resistant, mildew resistant and weather;

·         Good tensile strength and elongation;

·         Adaptable substrate shrinkage, deformation, crack;

·         High and low temperature performance.


standard


Q / SY YHF 016-2009 and JC / T 1075 to 2008.

Typical Properties

project

Claim

Content of soluble substances g / m2

4 mm

2900

5 mm

3500

Heat, ℃

105

Low temperature flexibility, ℃

-25

Watertight, 0.3 MPa

30 minutes pass

Maximum tensile strength, N root / 50mm≥

800

Elongation at maximum tensile strength,% ≥

40

Mass gain after immersion in water

ARC-701PE / S

1.0

ARC-701M

2.0

Aging terminal

Tensile strength retention,% ≥

90

Elongation retention,% ≥

80

Low temperature flexibility, ℃

-20

Dimensional change,% ≤

0.7

Mass loss,% ≤

1.0

Immersed in oil, sheet ≤

2

Joint and peel strength, N / mm ≥

1.5

Particle adhesion (for the ARC-701S), G≤

2.0

On the surface coating, mm ≥

1.0

Artificial aging behavior

Determination of visible defects.

No sliding, flowing, dripping

Tensile strength retention,% ≥

80

Low temperature flexibility, ℃

-20

Resistance to root penetration

by

Corrosion resistance

class

0 or 1

Tensile strength retention,% ≥

80

Dimensional change,% ≤

1.0

Bale

ARC-701 material in a plastic bag volume.

thickness

Surfacing

Roll size

Volume / tray

Tray / 20 'Container

4 mm

PE film

10 m2

twenty three

20

sand

twenty three

mineral

20

5 mm

PE film

20

sand

20

mineral

20

It said the number is only symbolic.


storage


ARC-701 material should be stored in a well ventilated place, Avoid the sun or rain. Local temperature can be stored Not more than 50 ° C. It can only be placed in a single stage vertical.


transport


In order to prevent tipping or sideways drift, ARC-701 Material can not be put in the two-stage vertical.

operating system

Dongsheng layer waterproofing system including vegetables, Soil, filter and aquifers, drainage layer, a protective layer, ARC film Waterproof layer, ordinary SBS waterproofing membrane, leveling course, slope Forming layer, spacer layer, the structural plate.


Construction method


Surface treatment

Surface should be dry, clean, smooth, no dust, Oil or loose particles. Cracks and surface irregularities need to be filled by the Polymer mortar.

Suck

Before laying the membrane, the substrate processing agents need to Drawing uniform, complete coverage of all paved areas.

Laying film

The adhesive film and the substrate or between the membranes, which can Hot melt or cold bonding method. Depending on the application design And application-specific components, it can be sufficient bonding method, imposed Sticky border law and adhere to the method.

Seal, fixed and limited to vertical surfaces

On vertical surfaces, fixing and sealing metal beads Sealing film.

Protection and isolation layer application

After laying the membrane, applied in protection and isolation layer Designed according to the waterproof layer.

 


Weifang Dongsheng waterproof material Co.,Ltd

Tel:86-15266615054

Contact Person:eva

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )