Home > Products > Modified bitumen membrane > sbs waterproof membrane > SBS Modified-Bituminous Waterp.....
Browse Categories
Home improvement eco-friendly materials(12)
Self-adhesive waterproofing tape(108)
Modified bitumen membrane(116)
High polymer membrane(302)
Geotextile & Geomembrane(49)
Waterproof Raw Material(43)
Waterproof Production Lines(10)
Pu Painting,Coating,Primer and Emulsion(28)
Asphalt Saturated Felt(10)
Self-adhesive bitumen membrane(95)
Certifications
Contact us
China Address: Zhengyang Road, Shouguang City, Shandong Province, ChinaTel:+86 18366529777Fax:+86 05365511977 E-mail:admin@dongshengwaterproof.com
Contact Now
SBS Modified-Bituminous Waterproof Membrane for roof basement tunnel building waterproof materailSBS Modified-Bituminous Waterproof Membrane for roof basement tunnel building waterproof materailSBS Modified-Bituminous Waterproof Membrane for roof basement tunnel building waterproof materail

SBS Modified-Bituminous Waterproof Membrane for roof basement tunnel building waterproof materail

  • Surface: PE film/ Fine Sand / Mineral Particle
  • Thickness: 3mm/4mm/5mm
  • Width: 1m
  • Lnegth: 10m/15m/20m or as request 
It  is a modified bitumen membrane consisting of Styrene-Butadiene-Styrene (SBS)modified asphalt mixed with imported chemical root inhibitor, reinforced with polyester fiber, and covered with different upper isolation materials. Waterproof membranes, surfaced with four different upper materials, are therefore divided into four types : PE film surfacing , Sand surfacing , Mineral surfacing and  Aluminum foil. Thickness 2mm, 3mm, 4 mm and 5 mm.






Advantages
1.Excellent in waterproofing anti-penetration;
2.Causing no damage to the normal growth of plants;
3.  High-strength membrane to resist water;
4. Penetration-resisting, wear-resisting, tear-resisting, corrosion-resisting,mould-resisting and weather-resisting;
5.  Good tensile strength and elongation;
6. Strong adaptability to shrinkage, deformation and cracks of substrate;
7.  Resistant to both high temperature and low temperature.


Where to use
1.Roofs or undergrounds;
2.Pools, such as swimming pools, fire pools;
3.Subways, tunnels, concrete road or bridge surfaces;
4.Sewage plants, garbage burying projects;
5.Penstocks


Standard
Q/SY YHF 016-2009 and JC/T 1075-2008. 

Packaging and transportation
SBS Modified bitumen membrane is packed in rolls with plastic bags. 



Storage
It can not be inclined or laterally drifted. Cover it with cloth when it is necessary.



Application methods
Surface preparation-----Surfaces should be dry, clean, smooth and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled with polymer mortar.
Priming-----Before membrane laying, substrate treating agent need to be brushed evenly and completely to cover all the surface to be laid on.
Membrane laying-----For adhesion between membrane and substrate or membranes, it can use hot melt method or cold adhesion method. According to application designs and specific applied parts, it can be applied by fully adhesion method, strip adhesion method and border adhesion method.
Sealing, fixing and constraining on vertical surfaces-----On vertical surfaces, fix with metal battens and seal with sealants for membranes.
Application on protection and isolation layer-----After membrane laying, construct protection and isolation layer according to waterproof layer design.



Weifang Dongsheng waterproof material Co.,Ltd

Tel:+8618053637268

Contact Person:sany

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )